£ 0.00


NICEIC Guide Inspection, Testing and Certification to 18th Edition 2018 (PDF)

£ 19.00
Main specifications
All specifications
PDF book:

⭐️Opens in any PDF file viewer
⭐️Ability to highlight, select, edit, save and print
⭐️Built-in search for words

How to download

To download the book in PDF format, register on this site, pay through the form of payment using a PayPal account or without a PayPal account - by paying by card in the form of PayPal.
After payment - return to the "Personal Account" - section "Downloads" on the site, where your PDF book will be available for download.
If for some reason you have difficulties with this process - send us a message and we will send your PDF book to your email.

About the book

Edition 2018
Pages: 257
Publisher: Certsure LLP
Language: English
Size: 125 Mb;

This Guide is intended to complement Part 6 of BS 7677: 2078 and covers the general requirements relating to the inspection and testing of electrical installations forming part of TN-C-S, TN-S and TT systems. In particular, the Guide provides practical advice and guidance on completion of the following:

NICEIC and ELECSA electrical installation certificates, including the minor works certificate,
NICEIC electrical installation condition reports, schedules of inspections and test results for certificates and reports, and performing the range of test methods required and verifying the results.


CHAPTER 1. Introduction
1.1 Aims and objectives
1.2 Scope
1.3 Arrangement of the book
1.4 The purpose of inspection, testing and certification or reporting
1.5 NICEIC and ELECSA certificates and reports
1.6 The inspector
1.7 Safe working procedure
1.8 Test equipment
CHAPTER 2. The electrical Certificate (and the Domestic Electrical Installation Certificate)
Additions or alterations
Continuation sheets
Compilation of the certificate
Part 1: Details of the contractor, client and installation
Part 2: Details of the electrical work covered by this installation certificate
Part 3: Next inspection of the electrical installation
Part 4: Declaration for the electrical installation work
Part 5: Comments on the existing installation
Part 6: Details of the organization (s) responsible for the electrical installation
Part 7: Supply characteristics and earthing arrangements
Part 8: Particulars of installation referred to in this certificate
Part 10: Schedules and additional pages
CHAPTER 3. The main electrical installation works certificate
3 Compilation of the certificate
3.1 Part 1: Details of the contractor, client and installation
3.2 Part 2: Details of the minor works, supply characteristics and earthing arrangements
3.3 Part 3: Circuit details
3.4 Part 4: Test results for the circuit altered or extended
3.5 Part 5: Declaration
CHAPTER 4. The Electrical Installation Condition report
(i) The need for periodic inspection and testing
(ii) The purpose of periodic inspection
(iii) Safety
(iv) Requirements
(v) Periodic inspection and testing procedures
4 Compiling the form
4.1 Part 1: Details of the contractor, client and installation
4.2 Part 2: Purpose of the Report
4.3 Part 3: Summary of the condition of the installation
4.4 Part 4: Declaration
4.5 Part 5: Next inspection
4.6 Part 6: Observations and recommendations for actions to be taken
4.7 Part 7: Details and limitations on the inspection and testing
4.8 Part 8: Supply characteristics and earthing arrangements
4.9 Part 9: Particulars of installation referred to in this Report
4.10 Part 11: Schedules and additional pages
CHAPTER 5. The Schedule of Circuit Details and test results (for new installation work and condition reporting)
5.2 Circuit details
5.3 Test results
5.4 Continuation sheets
CHAPTER 6. The Schedule of items Inspected for new Installation Work
(ii) Initial inspection of new work
6 Schedule of items inspected
6.1 External condition of intake equipment (visual inspection only)
6.2 Parallel or switched alternative sources of supply
6.3 Automatic disconnection of supply
6.4 Additional protection
6.5 Basic protection
6.6 Basic and fault protection
6.7 Distribution equipment
6.8 Circuits
6.9 Isolation and switching
6.10 Current-using equipment (permanently connected)
6.11 Special installations or locations
CHAPTER 7. The Inspection Schedule for Condition Reporting
7 Completion of the 'Schedule of Items Inspected'
7.1 External condition of intake equipment (visual inspection only)
7.2 Presence of adequate arrangements for parallel or switched alternative sources
7.3 Automatic disconnection of supply
7.4 Other methods of protection
7.5 Distribution equipment
7.6 Distribution / final circuits
7.7 Isolating and switching
7.8 Current-using equipment (permanently connected)
7.9 Special installations or locations covered in this Report
CHAPTER 8. Testing
8.2 Instrument accuracy
8.3 Required tests
8.4 Continuity of conductors
8.5 Insulation resistance
8.6 Polarity
8.7 Installation earth electrode resistance, (RA)
8.8 Polarity of incoming supply
8.9 Protection by automatic disconnection of supply
8.10 Measurement of external earth fault loop impedance, (Ze)
8.11 Measurement of maximum prospective fault current
8.12 Measurement of earth fault loop impedance, (ZS)
8.13 Additional protection
8.14 Operation of residual current devices
8.15 Verification of phase sequence
8.16 Functional testing of assemblies
8.17 Verification of voltage drop
Safe isolation
Test equipment
Minor Electrical Installation Works Certificate (MEIWC)
Recommended maximum periods between inspection and testing
International Protection (IP) Codes
Examples of the use of Classification codes
Resistance of copper conductors

Tags: Inspection, testing and certification guide

Format of the book
PDF book
Reviews (1)
An excellent self-study book. Thank you!